Schedule A Service

 

Right here in the next paragraph you can find a bunch of helpful information in relation to How to Troubleshoot and Repair an Electric Water Heater.

Many modern residences take advantage of an electrical water heater for their heating unit, due to its convenience and also convenience of use. Nonetheless, similar to any other electrical appliances, problems might develop with its usage, unexpectedly. It can be actually irritating to wake up to a cold shower instead of a warm one or having your bathroom with water that isn't hot enough or perhaps also hot. Whatever the case might be, hot water heater problems can be rather stressful. Luckily, we've made a list of possible remedies to your hot water heater problems. There are a variety of factors that might trigger a number of these problems, maybe an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you turn off the primary power supply for safety. Whatever the trouble is, getting it repaired should not present too much of a concern if you follow these actions:

 

Call A Professional:

If after changing all defective components and resetting your temperature level, the water heater still isn't functioning, you may need to speak to a professional plumber for a specialist viewpoint. The trouble with your heating unit could be that the cold and hot taps have actually been switched or it may be undersized for the quantity of warm water needed in your house. Whatever the case may be, a specialist plumber would assist solve the issue.

 

Inspect Your Power Supply:

As standard as this may appear, it is really required. Without appropriate power, your hot water heater will not work. So the first thing to do when your water suddenly retires is to confirm that it isn't a power issue. Examine if the fuse is blown out or the circuit breaker stumbled. If the breaker is the issue, just transform it on and off again. Change any kind of broken or worn-out fuse. Check the device with power after these changes to see if it's now working.

 

Examine Your Thermostat:

If your hot water heater still isn't functioning or the water appearing isn't hot enough, you may need to inspect the temperature level setups on your upper thermostat. Guarantee the circuit breaker is switched off before doing anything. Open the access panel as well as press the red switch for temperature level reset over the thermostat. This should help heat the water. Turn the circuit breaker back on as well as examine if the trouble has actually been resolved.

 

Check the Heating Element in the Water Heater:

If it's not a power problem, then try taking a look at your burner if it is still functioning. Examine each of your burner to ensure the trouble isn't with any one of them. If any one of them is malfunctioning, change that component and after that inspect whether the warm water is back on.

 

Final thought

Water heater issues are not always major. Much of them result from small concerns like a blown fuse or damaged heating element. Replacing the malfunctioning components must work. Nevertheless, if you are still not able to resolve the issue, give a call to your closest plumber to come to get it repaired.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

As a passionate person who reads about No Hot Water — Water Heater Repair, I think sharing that excerpt was worthwhile. Sharing is nice. Helping others is fun. Many thanks for going through it.

Get industry-leading emergency plumbing.